Test Report issued underthe responsibility of: TESTREPORT IEC 61558-1 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests Report Number. Dateofissue Total number of pages. Name of Testing Laboratory preparing the Report. Applicant's name.... Address... Test specification: Standard IEC 61558-1:2017 CB-Scheme Testprocedure Non-standard test method... N/A .. TRFtemplate used IECEEOD-2020-F1:2020.Ed.1.3 Test Report Form No.. IEC61558_1D Test Report Form(s) Originator ....:VDE Pruf- und Zertifizierungsinstitut GmbH MasterTRF Dated2021-07-09 Copyright2021IEcSystemofConformityAssessmentSchemesforElectrotechnical EquipmentandComponents (IECEESystem).All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and willnot assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-IECEE members, theIECEE/IEC logo and the referenceto the CB Schemeprocedure shall be removed. This report is notvalid asa CBTest Reportunless signed byanapproved IEcEETesting LaboratoryandappendedtoaCBTestCertificateissuedbyanNCB inaccordancewithIECEEo2. General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing NCB. The authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this Test Report. ReportNo.错误!未 Page 2 of 72 找到引用源。 Test item description .. Trade Mark(s). Manufacturer.. Model/Type reference ... Ratings .... Responsible Testing Laboratory (as applicable), testing procedure and testing location(s): CBTesting Laboratory: Testing location/address.. Tested by (name, function, signature).... : Approved by (name, function, signature).. : Testingprocedure:CTFStage1: Testinglocation/address... Testedby (name, function, signature).... : Approved by (name, function, signature).. : Testing procedure:CTFStage2: Testing location/address.. .... : Tested by (name + signature) Witnessed by (name, function, signature). : Approved by (name, function, signature).. : Testing procedure: CTF Stage 3: Testing procedure: CTF Stage 4: Testing location/address.. Tested by (name,function, signature).... Witnessed by (name, function, signature). : Approved by (name, function, signature).. : Supervised by (name, function, signature) : TRFNo.IEC615581D Page 3 of 72 ReportNo.错误!未 找到引用源。 List of Attachments (including atotal numberof pages in eachattachment): Summary of testing: Tests performed (name of test andtest Testing location: clause): Summaryof compliancewithNational Differences (Listof countriesaddressed): Theproduct fulfilstherequirements of (insertstandardnumberandeditionand delete the text in parenthesis, leave it blank or delete the whole sentence, if not applicable) Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the NCB and testing laboratory that conducted the testing. Statement not required by the standard used fortype testing (Note: When IEC or ISO standard requires a statement concerning the uncertainty of the measurement systems used for tests, this should be reported above. The informative text in parenthesis should be delete in both cases after selecting the applicable option) TRF No.IEC61558_1D